| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,049 Posts1,055,695 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#12894 12/13/2003 5:31 AM | Joined: Jun 2002 Posts: 81 Member | | Member Joined: Jun 2002 Posts: 81 | I bought a vintage 3spd OD off ebay which is complete and in good shape except it didn't come with a yoke. I still have the original non-OD 3spd in the truck which I could take the yoke from. Does anybody know if it should swap in ? also, is there anything that actually holds the yoke onto the tranny ie: a clip etc, or does it just slide on the spline with the universal joint/driveshaft length keeping it trapped ?
Thanks
:confused: | | |
#12895 12/13/2003 6:27 AM | Joined: Sep 2000 Posts: 390 Shop Shark | | Shop Shark Joined: Sep 2000 Posts: 390 | It slides in on the splines and is held in with a bolt in the center .
1942 1\2 Ton 1951 1\2 Ton 55 willys cj-5 1954 and 59 Cushman Scooter 1960 Biscayne Sedan 1965 G/10 panel van 1966 C/30 Grizzly Motorhome You know you're a 'Bolter when your daily driver is older than you are... My progress pics | | |
#12896 12/13/2003 4:17 PM | Joined: Jun 2002 Posts: 81 Member | | Member Joined: Jun 2002 Posts: 81 | That's what I expected, but the end of the output shaft of the tranny is not threaded and only has a
small hole or dimple really that probably was left over from it's manufacture. I suppose I could drill & tap it. The truck is an open driveline 3/4 ton by the way. | | |
|
|
| |
