| |
Click on image for the lowdown. 
====
| | |
0 members (),
177
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,113 Posts1,056,619 Members48,450 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jan 2016 Posts: 246 Shop Shark | | Shop Shark Joined: Jan 2016 Posts: 246 | My aftermarket oil pressure gauge on occasion will drop from 20lbs to 0 lbs at idle. and today driving along around 35mph it dropped from 35 lbs to 0 lbs and then came back up again to 35 lbs.
Truck runs great, dipstick shows oil is full. Can these oil pressure gauges go bad ? Never had one act this way. It freaked me out the first time it happened. I pulled over immediately and shut engine off and checked the oil. It was full. Started the engine up and had 35 lbs immediately.??????...This is an after market gauge.
1953 chevy 1/2 ton with 3 speed 318 on floor and 1955 235 engine
| | | | | Joined: Apr 2005 Posts: 7,441 Bolter | | Bolter Joined: Apr 2005 Posts: 7,441 | Check all your connections and fittings. If all good then replace the sending unit. If that doesn't fix it then the gauge is next.
Martin
'62 Chevy C-10 Stepside Shortbed (Restomod in progress)
'47 Chevy 3100 5 Window (long term project)
‘65 Chevy Biscayne (Emily)
‘39 Dodge Business Coupe (Clarence)
“I fought the law and the law won" now I are a retired one!
Support those brave men/women who stand the "Thin Blue Line"! Hug a cop!
USAF 1965-1969 Weather Observation Tech (I got paid to look at the clouds)
| | | | | Joined: Feb 2004 Posts: 29,836 Kettle Custodian (pot stirrer) | | Kettle Custodian (pot stirrer) Joined: Feb 2004 Posts: 29,836 | Are you running a direct-reading gauge or an electric one? A direct-read gauge (with a pressure line, not a wire) would be very unlikely to fail intermittently. What can happen is a sticky oil pump relief valve which can allow the pressure to drop suddenly, then recover as the engine is shut down and restarted. I'd suggest running a temporary direct-reading gauge to see if you can duplicate the problem independently of the present gauge. It won't take very many sudden episodes of actual pressure loss to do some pretty severe bearing damage.
Jerry
"It is better to be silent and be thought a fool than to speak and eliminate all doubt!" - Abraham Lincoln
Cringe and wail in fear, Eloi- - - - -we Morlocks are on the hunt!
There is nothing noble in being superior to your fellow man; true nobility is being superior to your former self. - Ernest Hemingway
Love your enemies and drive 'em nuts!
| | |
|
|
| |
