The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
Help is a click away!

VEHICLE
INFORMATION
KITS


at the

GM Heritage Center
All the details are here.

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
5 members (Rustnut, Donf, Gdads51, Charles in CA, lumbersawyer), 63 guests, and 3 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,203
Posts1,057,414
Members48,471
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
Joined: Dec 2011
Posts: 33
L
Shop Shark
Shop Shark
L Offline
Joined: Dec 2011
Posts: 33
I am trying to figure out where the purple wire goes. The green is the coil wire and the purple should be the resistor bypass. The foot starter has one smaller terminal on the side other than the main power cable but there is nothing on it. The purple wire comes from the same rubber plug/ hole in the fire wall. Where is it suppose to be?
Thanks.

Joined: Jun 2006
Posts: 693
T
'Bolter
'Bolter
T Offline
Joined: Jun 2006
Posts: 693
i'm going back a few years ago since i rewired my 56 - and its 4am here and dark out so i can't go look - but the purple wire is indeed the resistor bypass to deliver full voltage to the coil while cranking. it goes to that small terminal on the starter switch. it runs inside the cab to the ignition switch wiring and back out to the downstream terminal of the resistor. if i recall correctly, it is a strange wiring arrangement - but schematically it does provide +12v to the coil when cranking.

by the way, this is for the 235 6-cyl. the V8 is wired a little differently

Joined: Dec 2011
Posts: 33
L
Shop Shark
Shop Shark
L Offline
Joined: Dec 2011
Posts: 33
Thanks that is exactly what I wanted to know. For some reason I had it in my head that it went to the distributor side of the coil. Thanks.
Lmd.


Moderated by  Jon G, Rusty Rod 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0