| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,083 Posts1,055,967 Members48,430 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2002 Posts: 42 Wrench Fetcher | | Wrench Fetcher Joined: Apr 2002 Posts: 42 | Been looking a long time for outside mirror for my 34 half ton Chevy pickup. Finally got one. A few rust holes and no glass, but at least I finally have one. Question is: How does one get the upper pin out of driver's door? Does it tap out, or what? I tried a little tapping, but it didn't budge. Figured rather than break something, I'd try to get some wisdom from those in the know. Any info or suggestions appreciated. Thanks. wjb | | | | | Joined: Jun 2003 Posts: 331 Member | | Member Joined: Jun 2003 Posts: 331 | If it dosn't budge you might need to heat shaft up with a torch. When you drive it out use a brass punch so you don't mushroom the bottom of the pin. If you are installing where there never was a mirror you will need a longer pin | | | | | Joined: Apr 2002 Posts: 42 Wrench Fetcher | | Wrench Fetcher Joined: Apr 2002 Posts: 42 | Stuart 989:
Thanks for the info. I appreciate it. I did get the longer pin. wjb | | |
|
|
| |
