| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,042 Posts1,055,519 Members48,424 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Nov 2010 Posts: 27 Wrench Fetcher | | Wrench Fetcher Joined: Nov 2010 Posts: 27 | I have a 1958 Apache and the wiper switch failed. I bought one from LMC and it is totally different than old switch has 2 terminals new one has 4,looks like bat,low, high,and park any thoughts on how to wire this? | | | | | Joined: Dec 2015 Posts: 2,062 Big Bolt Forum Moderator | | Big Bolt Forum Moderator Joined: Dec 2015 Posts: 2,062 | good luck! I do not believe they make an exact replacement. I have pulled 2 apart and cleaned the contacts and then put them back together (had to epoxy the back on though). I did buy one out of a 64-88 truck, it also has the washer terminal on it. You could drill the center if you knob out if it is solid (some just had a rubber plug in them). I believe the internals of the switch are fine, but it fits in a bigger hole so, you will have to file out the hole in your dash and bezel nut and then find another small thin nut to hold it on with. Chevy part # is 1993641. Here is a link to one on Ebay. http://www.ebay.com/sch/i.html?_fro...93641.TRS5&_nkw=1993641&_sacat=0 | | | | | Joined: Nov 2010 Posts: 27 Wrench Fetcher | | Wrench Fetcher Joined: Nov 2010 Posts: 27 | Thanks Cuda for the tip will give it a try! | | |
|
|
| |
