The Stovebolt Site Forums The Parking Lot '60-'66 Trucks Headlamp picture 1965 GMC

Well I didn't take good pictures of the headlamp assemblies when I took it apart and now I am trying to put it back together this truck has 4 headlights

1 when I install the headlamp bucket are the adjusting screws at the top and side or the bottom and side
2 where do I hook the springs
3 does anyone have any pictures they could E-Mail me or where can if find pictures of the headlight showing how they fit in ( [email protected] )
4 is there a difference in left and right side
5 with two headlights is the high beam on the inside or the out side

Thanks for any help you can give

http://www.lmctruck.com/icatalog/cbe/full.aspx?Page=109
All your answers are here. High beam inboard.

Thanks this will help

Sealed beams may be marked "1" for inboard lamp and "2" for outboard. The LMC pic is looking at drivers side. Springs are located between the two lamp pair.

The left & right are the same but the inner & outer are different. The hi/low goes outside & the high only goes inside.

Thank to everyone for your help