The Stovebolt Site Forums The Parking Lot Big Bolts Progress on my Big Bolt

When I joined this forum I said I would try to post some pictures of my project, I'm not good at this computer stuff. This is my second try, first post disappeared before I could get it done. Had some problems using photobucket too but I hope it works this time. The first pictures are of the 52 6400 when I first got it, then different ones during all the work. Unfortunately I didn't take pictures right at first. Hope the more professional guys don't laugh too much at my efforts.

Steve
52 6400 Rear of truck Same truck with front clip, engine removed, frame coated Right side of 235 engine Left side of engine Driver's side of rusted out floor Underside of seat after years of mice making nests Seat pedestal with several inches of grain chaff, seeds, dirt, and mouse crap Rusted out LF Another view of rusted floor Inside right and more rust Floor removed and frame cleaned and painted Driver's side kick panel removed Firewall side after floor and toe board cut out New floor installed and primed Seat pedestal after cleaning, POR-15, and priming Interior after painting, camera for some reason makes the brown interior paint look silver Firewall after repairs and priming Firewall after painting with new commercial red paint Start of installation of new wiring harness Dash with most stuff back in Restored radio Rebuilt heater assembly Cleaned, relined gas tank back in Transmission back in Engine back in the truck Driver's side of mostly finished cab, no doors yet Right side of cab interior

WOW! You've been a busy boy! Looking good!

Coming right along!