| |
Labor Day Putting down your wrenches or time for
MORE wrenching? 
Plenty of places to share. | | Click on image for the lowdown. 
====
| | |
7 members (TexasJim50, rick46ia, cmayna, Southerntruck, SNOYL, ShopRag, Mike Roache),
45
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,006 Posts1,055,271 Members48,418 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Aug 2013 Posts: 59 Wrench Fetcher | | Wrench Fetcher Joined: Aug 2013 Posts: 59 | I am working on a1965 gmc that had a v-6 in it have changed over to 350 small block my ignition switch has 4 prongs the marking on the prongs are as follow
BAt
ING
ACC
D-R
using a ohm meter when I turn the key to 1st postion all 4 prongs I get a reading when I move the key to what I thing is the start the ING prong drops out and I get no ohm reading on it but I do get a reading on the other prongs which wire should I use for the start selnoid for the started is there any where I can get a wiring digrham
Bob May
| | |
|
|
| |
