Ridged Foam Cutting, the easy way

Print Thread

Re: Ridged Foam Cutting, the easy way Denny Graham #977269 10/08/2013 3:20 PM
Joined: Feb 2002 Posts: 12,029 north of the 49th F Flxible Cruising in the Passing Lane
Flxible Cruising in the Passing Lane F Joined: Feb 2002 Posts: 12,029 north of the 49th	you just like re-inventing wheels Denny a cheap Olfa knife with snap-off blades does fine for rigid foam, extend the blade far enough to cut the depth/thickness needed - what most construction folks around here use, and worked fine doing daBus floor with very little mess, does nice curves and notches too Bill Moved over to the Passing Lane "When we tug a single thing in nature, we find it attached to the rest of the world" ~ John Muir "When we tug a single thing on an old truck, we find it falls off" ~ me Some TF series details & TF heater pics

Entire Thread
Subject	Posted By	Posted
Ridged Foam Cutting, the easy way	Denny Graham	10/08/2013 1:30 PM
Re: Ridged Foam Cutting, the easy way	Flxible	10/08/2013 3:20 PM
Re: Ridged Foam Cutting, the easy way	Denny Graham	10/08/2013 6:40 PM
Re: Ridged Foam Cutting, the easy way	Chev4t6	10/08/2013 7:35 PM
Re: Ridged Foam Cutting, the easy way	bartamos	10/08/2013 7:41 PM
Re: Ridged Foam Cutting, the easy way	Flxible	10/08/2013 9:08 PM
Re: Ridged Foam Cutting, the easy way	Achipmunk	10/09/2013 3:27 AM
Re: Ridged Foam Cutting, the easy way	bartamos	10/09/2013 6:18 AM
Re: Ridged Foam Cutting, the easy way	Denny Graham	10/09/2013 10:09 AM
Re: Ridged Foam Cutting, the easy way	bartamos	10/09/2013 5:00 PM
Re: Ridged Foam Cutting, the easy way	gazim	10/17/2013 7:42 PM
Re: Ridged Foam Cutting, the easy way	Deve	10/10/2013 2:31 AM
Re: Ridged Foam Cutting, the easy way	Denny Graham	10/14/2013 2:23 PM
Re: Ridged Foam Cutting, the easy way	Hotrod Lincoln	10/15/2013 3:54 AM
Re: Ridged Foam Cutting, the easy way	kb3csw	10/15/2013 6:50 PM
Re: Ridged Foam Cutting, the easy way	Denny Graham	10/16/2013 1:21 PM
Re: Ridged Foam Cutting, the easy way	52Carl	10/16/2013 7:52 PM
Re: Ridged Foam Cutting, the easy way	Denny Graham	10/18/2013 1:21 AM
Re: Ridged Foam Cutting, the easy way	gazim	10/19/2013 1:30 PM
Re: Ridged Foam Cutting, the easy way	Paul_WNC	10/19/2013 2:47 PM
Re: Ridged Foam Cutting, the easy way	Denny Graham	10/19/2013 9:33 PM
Re: Ridged Foam Cutting, the easy way	Paul_WNC	10/20/2013 1:55 PM
Re: Ridged Foam Cutting, the easy way	Flxible	10/20/2013 2:40 PM

Moderated by MNSmith

Hop To

Link Copied to Clipboard

The Stovebolt Site Forums The Shop Area The Tool Chest Ridged Foam Cutting, the easy way