| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,162 Posts1,056,913 Members48,458 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: May 2005 Posts: 8,983 Sir Searchalot | | Sir Searchalot Joined: May 2005 Posts: 8,983 | "Re-invent the wheel" means there is already a wheel. Like already a knife that works. Bill was just kidding you anyway. and providing a alternate cutter for those who don't want to mess up a good putty knife. Both ideas are worth mentioning and any other ideas some folks may have. If construction guys use it, it is the best tool for the job. Can't see blades getting dull too fast cutting foam? Olfa sold "down here" by Home Depot, Sears, Grainger, Amazon, Ebay.....
Right is right, even if everyone is against it, and wrong is wrong, even if everyone is for it. - William Penn
| | | |
Entire Thread
|  
Ridged Foam Cutting, the easy way
| Denny Graham | 10/08/2013 1:30 PM | |
Re: Ridged Foam Cutting, the easy way
| Flxible | 10/08/2013 3:20 PM | |
Re: Ridged Foam Cutting, the easy way
| Denny Graham | 10/08/2013 6:40 PM | |
Re: Ridged Foam Cutting, the easy way
| Chev4t6 | 10/08/2013 7:35 PM | |
Re: Ridged Foam Cutting, the easy way
| bartamos | 10/08/2013 7:41 PM | |
Re: Ridged Foam Cutting, the easy way
| Flxible | 10/08/2013 9:08 PM | |
Re: Ridged Foam Cutting, the easy way
| Achipmunk | 10/09/2013 3:27 AM | |
Re: Ridged Foam Cutting, the easy way
| bartamos | 10/09/2013 6:18 AM | |
Re: Ridged Foam Cutting, the easy way
| Denny Graham | 10/09/2013 10:09 AM | |
Re: Ridged Foam Cutting, the easy way
| bartamos | 10/09/2013 5:00 PM | |
Re: Ridged Foam Cutting, the easy way
| gazim | 10/17/2013 7:42 PM | |
Re: Ridged Foam Cutting, the easy way
| Deve | 10/10/2013 2:31 AM | |
Re: Ridged Foam Cutting, the easy way
| Denny Graham | 10/14/2013 2:23 PM | |
Re: Ridged Foam Cutting, the easy way
| Hotrod Lincoln | 10/15/2013 3:54 AM | |
Re: Ridged Foam Cutting, the easy way
| kb3csw | 10/15/2013 6:50 PM | |
Re: Ridged Foam Cutting, the easy way
| Denny Graham | 10/16/2013 1:21 PM | |
Re: Ridged Foam Cutting, the easy way
| 52Carl | 10/16/2013 7:52 PM | |
Re: Ridged Foam Cutting, the easy way
| Denny Graham | 10/18/2013 1:21 AM | |
Re: Ridged Foam Cutting, the easy way
| gazim | 10/19/2013 1:30 PM | |
Re: Ridged Foam Cutting, the easy way
| Paul_WNC | 10/19/2013 2:47 PM | |
Re: Ridged Foam Cutting, the easy way
| Denny Graham | 10/19/2013 9:33 PM | |
Re: Ridged Foam Cutting, the easy way
| Paul_WNC | 10/20/2013 1:55 PM | |
Re: Ridged Foam Cutting, the easy way
| Flxible | 10/20/2013 2:40 PM | |
|
|
| |
