Only had a little time to check it out and found out I'm a little to big to fit under the truck without lifting up the truck.
Jacked it up and was able to look things over, everything out side is hooked up & working. There is zero pressure at the clutch fork
Time to pull the trans. What size are the 2 transmission guide pins ?? Something like 3/8"-16 x 3" ?? On other trans jobs I've used bolts that I cut the heads off.
Is it easier to pull tranny thru floor or to remove trans cross member ? Whats a 3-speed trans weigh 100# ?
Anyone have any better steps on removing the trans & clutch, besides the shop manual way?
Thanks
