| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,034 Posts1,055,539 Members48,425 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Dec 2003 Posts: 2,733 Shop Shark | | Shop Shark Joined: Dec 2003 Posts: 2,733 | I recently recieved this from a new viewer so I am submitting it to the forum regulars for appropriate response. No name was given unfortunately.
"hello
i browsed the site for information
i am not a member but have hard time finding help
i would like to put a 91 truck engine onto the sm318 3speed
originally this trans was mated to the 327 2 bbl in the 65 c10
the bellhousing fits the back of the 350 ( tbi centerbolt heads 1 piece rear main seal) with the 350 flywheel but i did not have the clutch on
crank turned freely
before i go further, should i go with the 327 flywheel....im some i will have issues with the crank since the 350 is externally ballanced
the 327 has a 12" clutch
a vortec flywheel with 168 teeth is compatible with 12" clutch so im told
being 65, is the bell housing same as the 68-91 manual 4-11/16" housings?
would i need a spacer or adapter for the fork or shaft?
any wisdom tips or links to search would be appreciated
| | |
|
|
| |
