| |
Click on image for the lowdown. 
====
| | |
0 members (),
170
guests, and
3
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,081 Posts1,056,078 Members48,434 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Oct 2010 Posts: 1,232 'Bolter | | 'Bolter Joined: Oct 2010 Posts: 1,232 | Is this for your '50? I thought that vent windows were introduced in 1951. If yours are like the ones in my '54, you must drill out the pivot rivet to remove the vent window. Then install the new rubber. Position the vent and replace the rivet.
Vent window pivot rivets and rivet setting tools are available from most supplers. I was lucky. I found it pretty easy to set the rivet. Alvin replaced his rivot with a special bolt. He can tell you how he did it.
I assume that you are doing this with the vent assembly removed from the door. Don't think I would want to try to set the pivot rivet while the assembly is in the door.
Note - the rubber seal overlays the window garnish. A little dish washing liquid may ease it into postion.
- Lonnie My '54 3104Photos that I have shared on Stovebolt via PhotoBucket are no longer available. Please contact me if you want a photo from an old post. lonniecook [at] aol [dot] com. I sold my '54 3104 12/12/2017, but I still visit Stovebolt. OLD STUFF ... houses, furniture, cars, wine ... I love it all | | |
|
|
| |
