| |
Click on image for the lowdown. 
====
| | |
7 members (Wickedbass, MRMEROTH11, GradyB, SWEET, TexasJim50, klhansen, TUTS 59),
67
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,066 Posts1,055,873 Members48,428 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Oct 2007 Posts: 10 New Guy | | New Guy Joined: Oct 2007 Posts: 10 | Just picked up a 72 chevy from california. Has the 402 BB.First trip out with a good sized trailer behind I was loosing power as it got warmed up.I had seen there were wire problems back at the coil hookup, so I put new wires to it,at start the 12V was there, but at run I was down to 5-6V.On my maiden trip when it was loosing power I hot wired the coil to get 12V and it helped a lot. What should the Voltage be to the coil at run, and is there a resistor wire out there available or should I go HEI and forget the problem. Thank You
Dennis M
| | |
|
|
| |
