Hello, I replaced the push button starter on my 46 truck (has a 235 engine) with a 6 volt foot starter. My question is how do I wire it. Please see picture labeled New Foot Starter. Which wires go connected to the solenoid? I am guessing the positive battery cable, but there are also a blue cable that is coming from the ignition switch, a yellow cable that is coming from the 6 volt alternator and a thicker cable that is coming from the Gauge Instrument Cluster. There are also two bolts on the end of the starter, does anything go connected there?

Also a question on the coil does the positive connector on the coil go connected to the ignition switch or to the distributor?

Please help



Old Push Button Starter

New Foot Starter

1946 Chevy Truck Export Blue with Black Trim