| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,050 Posts1,055,646 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Dec 2002 Posts: 571 Shop Shark | | Shop Shark Joined: Dec 2002 Posts: 571 | I have a bad vibration in the driveline of my 49 after getting it back together with the T5 trans and the 3.73 rear end. I installed a crossmember under the trans (tubular type). This took about 60% of the vibraton out. Next I installed shims to change the pinion angle a little and this took out about another 20%. I read alot of articles on setting up the driveline and I thought I had it right. I guess most things with these old trucks are trial and error. (emphisis on error) :rolleyes: Thats where I'm at now. I'm fairly certain that the wheels are all balanced, unless one slung a weight. And the driveshaft is new. I assume the shop I got it from balanced it. :rolleyes: Guess I'll keep teaking things till I get it right. If anyone has any suggestions that I should try, I'm all ears. Thanks. | | |
|
|
| |
