| |
Click on image for the lowdown. 
====
| | |
0 members (),
99
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,143 Posts1,056,494 Members48,442 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Mar 2005 Posts: 1,636 'Bolter | | 'Bolter Joined: Mar 2005 Posts: 1,636 | Have you tried to bleed the clutch by pushing fluid through the slave first. Basically backwards through the system?
If you can hook up to the bleeder on the slave cylinder, you may can push the fluid back towards the master cylinder. I have very good results with that when hydraulic clutch would not bleed.
Another thing that has worked is setting a pan under the bleeder and just opening it letting the fluid flow through the system by gravity. Have someone watch the fluid level as it drains and keep it full till there are no bubbles. | | |
|
|
| |
