| |
Click on image for the lowdown. 
====
| | |
2 members (KEVINSKI, crenwelge),
108
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,135 Posts1,056,422 Members48,441 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Dec 2001 Posts: 14,522 Moderator: Welcome Centre, Southern Bolters, Legion Hall | | Moderator: Welcome Centre, Southern Bolters, Legion Hall Joined: Dec 2001 Posts: 14,522 | Al, if your talking about the little rubber strip that goes at t he bottom and is attached to the cab YES I had the same problem. So much so that when I closed the door it caused the bottom half of the door to stick out. I ended up taking a razor blade and just trimming the rubber off. Problem solved for now.
I must add this. My metal door panels were so bad that I covered them with a think piece of foam and then thin upholstery fabric over the foam. I'm sure this didn't help the situation very good and I could see the rubber imprint in the foam/fabric.
Its my opinion however that the foam and fabric, compressed, should not have made that big of difference.
The 37 is the first pickup I did a FULL restoration on and now that I am retired I'd like to take the 37 back apart and do it again to straighten out some stuff from door hinges and door panels to re-locating the gas tank. (Right after I get finished with the panel, maybe a studebaker and and and....:) | | |
|
|
| |
