| |
Click on image for the lowdown. 
====
| | |
0 members (),
79
guests, and
4
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,021 Posts1,055,373 Members48,420 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Dec 2001 Posts: 14,522 Moderator: Welcome Centre, Southern Bolters, Legion Hall | | Moderator: Welcome Centre, Southern Bolters, Legion Hall Joined: Dec 2001 Posts: 14,522 | JTK..if you are not planning to do another project I promise you that you will be much better off having someone blast the pieces for you. Save yourself a lot of sweat and aggravation and probably save time. A "search" here will probably give you hours and hours of the "good,bad,ugly". Unless you have a good air compressor and DRY air your attempts will be futile.
Yes, these are my opinions and I've "been there and done it" quite a bit. If it don't fit in the blasting cabinet it goes out to a fellow I know that does a good job.
... you may want to even do a search on soda blasting before you go that route. Just my opinions. | | |
|
|
| |
