The Stovebolt Site Forums The Shop Area Engine Shop 3.55 ring and pinion installation trouble!

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

2 members (TUTS 59, cmayna), 82 guests, and 2 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,075

Posts1,056,279

Members48,441

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: 3.55 ring and pinion installation trouble! #76013 04/09/2007 4:31 PM
Joined: Apr 2000 Posts: 499 California R Richard 'Bolter
Richard 'Bolter R Joined: Apr 2000 Posts: 499 California	You need to take doc41's suggestion a little more serious. The wear pattern may look OK right now, but if the preload isn't right, the wear pattern and the back lash will change before you get it out of first gear. '67 GMC 3/4 292 4spd

Entire Thread
Subject	Posted By	Posted
3.55 ring and pinion installation trouble!	justin squire	04/07/2007 3:54 AM
Re: 3.55 ring and pinion installation trouble!	Hot Rod Dad	04/07/2007 3:24 PM
Re: 3.55 ring and pinion installation trouble!	Wisner955	04/07/2007 7:52 PM
Re: 3.55 ring and pinion installation trouble!	justin squire	04/07/2007 11:21 PM
Re: 3.55 ring and pinion installation trouble!	justin squire	04/09/2007 2:44 AM
Re: 3.55 ring and pinion installation trouble!	235 Fat Fenders	04/09/2007 12:05 PM
Re: 3.55 ring and pinion installation trouble!	doc41	04/09/2007 12:18 PM
Re: 3.55 ring and pinion installation trouble!	justin squire	04/09/2007 3:49 PM
Re: 3.55 ring and pinion installation trouble!	64fleetside	04/09/2007 4:03 PM
Re: 3.55 ring and pinion installation trouble!	Richard	04/09/2007 4:31 PM
Re: 3.55 ring and pinion installation trouble!	justin squire	04/09/2007 6:31 PM
Re: 3.55 ring and pinion installation trouble!	Wrenchbender Ret.	04/09/2007 8:50 PM
Re: 3.55 ring and pinion installation trouble!	Builder	04/09/2007 9:26 PM
Re: 3.55 ring and pinion installation trouble!	justin squire	04/09/2007 11:42 PM
Re: 3.55 ring and pinion installation trouble!	olememphis51	04/11/2007 2:17 AM

Moderated by Phak1, Woogeroo

Hop To

Link Copied to Clipboard