| |
Click on image for the lowdown. 
====
| | |
0 members (),
186
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,143 Posts1,056,494 Members48,442 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jun 2004 Posts: 8,597 Riding in the Passing Lane | | Riding in the Passing Lane Joined: Jun 2004 Posts: 8,597 | The positive goes to an ignition resister & is connected to the starter as a bypass. The neg goes to the dist. If they were reversed it would still start & run. If no resister was put in the system when it was changed to 12 volts it will burn the points in short time unless it is using a tractor coil.
Remove the dist cap & turn on the switch. Take a screwdriver & touch it across the points. Take the coil wire from the center of the dist cap & set it close to part of the engine. Each time you make & break contact on the points you should get a spark from the coil wire.
They say money can't buy happiness. It can buy old Chevy trucks though. Same thing. 1972 Chevy c10 Cheyenne SuperIn the Gallery Forum | | |
|
|
| |
