Timing and Starting

Print Thread

Timing and Starting #744205 05/03/2011 12:07 AM
Joined: Apr 2011 Posts: 174 Squamish, British Columbia, Ca... J Josh_51GMC Wrench Fetcher
Josh_51GMC Wrench Fetcher J Joined: Apr 2011 Posts: 174 Squamish, British Columbia, Ca...	So I have replaced all of the ignition components, distributer cab, rotor, points, condenser, resistor, ect. and it sill wont start. I've got plenty of gas going through the carb as it it leaking but my spark plugs are dry to the bone... why is this? also i set the timing to TDC and started to turn the truck over, it sounded like it was about to catch and fire up but instead just coughed out of my carb and went to a really slow turn over... Could this be from when i set the trucks timing to TDC on the Camshaft the Crank was at the wrong spot, opening the exhaust when it should be intake? Last edited by Josh_53GMC; 05/05/2011 5:20 AM. Josh Josh's money pit!

Entire Thread
Subject	Posted By	Posted
Timing and Starting	Josh_51GMC	05/03/2011 12:07 AM
Re: Timing and Starting	bigbadswingdaddy	05/03/2011 9:52 AM
Re: Timing and Starting	di1953gmc	05/03/2011 3:05 PM
Re: Timing and Starting	Josh_51GMC	05/05/2011 5:13 AM
Re: Timing and Starting	Josh_51GMC	05/05/2011 5:22 AM
Re: Timing and Starting	don stocker	05/05/2011 2:29 PM
Re: Timing and Starting	truckernix	05/05/2011 4:23 PM
Re: Timing and Starting	di1953gmc	05/05/2011 4:54 PM
Re: Timing and Starting	Josh_51GMC	05/06/2011 1:43 AM
Re: Timing and Starting	tclederman	05/06/2011 2:24 AM
Re: Timing and Starting	Grigg	05/06/2011 2:43 AM
Re: Timing and Starting	kb3csw	05/06/2011 2:44 AM
Re: Timing and Starting	kb3csw	05/06/2011 3:05 AM
Re: Timing and Starting	Josh_51GMC	05/06/2011 3:38 AM
Re: Timing and Starting	kb3csw	05/06/2011 1:12 PM
Re: Timing and Starting	kb3csw	05/06/2011 1:48 PM
Re: Timing and Starting	Josh_51GMC	05/07/2011 1:02 AM
Re: Timing and Starting	Grigg	05/07/2011 1:43 AM
Re: Timing and Starting	bigbadswingdaddy	05/07/2011 2:55 AM
Re: Timing and Starting	Josh_51GMC	05/07/2011 7:32 PM
Re: Timing and Starting	Josh_51GMC	05/07/2011 7:35 PM
Re: Timing and Starting	Josh_51GMC	05/07/2011 8:37 PM
Re: Timing and Starting	3B	05/07/2011 8:48 PM
Re: Timing and Starting	Josh_51GMC	05/07/2011 8:52 PM
Re: Timing and Starting	3B	05/08/2011 12:28 AM
Re: Timing and Starting	Josh_51GMC	05/08/2011 1:10 AM
Re: Timing and Starting	Josh_51GMC	05/08/2011 1:15 AM
Re: Timing and Starting	3B	05/08/2011 2:41 AM
Re: Timing and Starting	Josh_51GMC	05/08/2011 2:55 AM
Re: Timing and Starting	3B	05/08/2011 3:26 AM
Re: Timing and Starting	Josh_51GMC	05/08/2011 4:50 AM
Re: Timing and Starting	bigbadswingdaddy	05/08/2011 5:19 AM
Re: Timing and Starting	bigbadswingdaddy	05/08/2011 5:24 AM
Re: Timing and Starting	Josh_51GMC	05/08/2011 7:55 PM
Re: Timing and Starting	bigbadswingdaddy	05/08/2011 10:08 PM
Re: Timing and Starting	Josh_51GMC	05/10/2011 1:13 AM

Moderated by Phak1, Woogeroo

Hop To

Link Copied to Clipboard

The Stovebolt Site Forums The Shop Area Engine Shop Timing and Starting