| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,162 Posts1,057,057 Members48,463 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Oct 2005 Posts: 1,317 Shop Shark | | Shop Shark Joined: Oct 2005 Posts: 1,317 | Check out your tailshaft slip yoke outer surface for scoring from a bad bushing. If the outer surface is smooth your bushing should be okay. If you yoke is galled you'll need to locate a bushing puller and installation tool to R&R the bushing. The new bushing and new rear yoke seal can be found at AutoZone....Timken 5200 for about $8.00. You'll also need to get a new yoke....best bet is a place that rebuilds driveshafts and the 5-1/2" yoke that is standard for most GM transmissions will run about $55-$75.00.
When you fill the transmission be sure to get it completely full as a low fluid level will play havoc with the bushing.
Dave | | |
|
|
| |
