Grigg -- Measurements off Ole Charlie:

In stock configuration, running 7.50x19 tires

Outside of sidewall to outside of sidewall: 65 11/16"
Top of wheel sidewall to fender opening (top): 3 1/2"

Turning clearances

front of fender opening: 2 1/2"
Back of fender opening: 2"

At full throw (wheels at full turn), the tire is 1 3/4" from the rear springs (limiter at front is the shock (single action) and the clearance appeared to be 5 or 6 inches or more).

If you need more, let me know. Looks like I came within spittin' distance of Ghostrider's radial-equipped truck (beautiful truck BTW!) But I think you have less than 2 inches to play with before you run out of schlitz on the wheel opening.

Thanks for the support Steve Sr.!

Hope this helps.

John


~ John

A kid raised on Hotwheels, Matchbox and Tonka cannot be reasonably expected to own only one vehicle as an adult.

1949 Chevrolet 3804
In the Legacy Gallery | In the Gallery Forum
1973 IH 1310 Dump
1963 Kaiser M38A1
2001 International/AmTran RE3000 "Skoolie"
2014 Ford E-350 4x4 (Quigley)