| |
Click on image for the lowdown. 
====
| | |
1 members (Denny Graham),
84
guests, and
4
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,194 Posts1,057,261 Members48,466 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Dec 2001 Posts: 14,522 Moderator: Welcome Centre, Southern Bolters, Legion Hall | | Moderator: Welcome Centre, Southern Bolters, Legion Hall Joined: Dec 2001 Posts: 14,522 | If the tank is galvanized then it don't need painting. As someone mentioned in another post IF you do paint it rinse it with vinegar. I personally would leave it along.
There should be no need to put something under a new gasket as long as its tightened properly. Some gaskets are cork, some are rubber. Most re-pop are rubber unless you order the cork ones. Just depends on the site/vendor.
I don't think paint, one way or the other would hurt as there is no gas getting to the paint unless the sender is not tight. But, if you paint, it could effect the ground which is the most common problem with guages these days.
In short, I'd not paint the tank or sender and I would make sure all/any connections are tight with new seals/rubber. A new gas cap is also in order. You should not have a gas smell problem.....except maybe right after you fill up for a minute or two.....all this is my opinion, and what I do with new tanks.
Whew, this got to long. | | |
|
|
| |
