i have a 1966 Chevy C-30. ive rarely seen them around my part of the states, and never have i seen one customed out. i was originally just trying to get it running, and hadnt thought much further than that. after 1 weekend i got that far. a friend of mine convinced me to custom/rat rod it. (i did my car and its one of those things i have a 3rd eye for). i figured out the kit to flip the rear axle, but what about the front? i found drop spindles but only for the C-10's. i figure the back is going to drop about 6 inches (yes i will be doing the c-notch) and im planning to put bigger tires on the back and smaller in front so it only needs to get dropped . . . .4" or so. any one have any suggestions? tryin to keep it as low budget as possible. dont much care if its buying new parts or moding the ones that are already there. (prefer moding whats already there however)
