I made my own wiring harness. I used a haywire fuse block. any fuse block will work. I have many of the heavy duty circuits on fuse links wires to relays. The switch operates the relay and constant current to that fixture.
http://s67.photobucket.com/albums/h298/1951otter/?action=view&current=15A-1.jpg
http://s67.photobucket.com/albums/h298/1951otter/?action=view&current=14A-1.jpg
http://s67.photobucket.com/albums/h298/1951otter/?action=view&current=17A-1.jpg
http://s67.photobucket.com/albums/h298/1951otter/?action=view&current=0732700-R1-038-17A.jpg
http://s67.photobucket.com/albums/h298/1951otter/?action=view&current=0732700-R1-034-15A.jpg
http://s67.photobucket.com/albums/h298/1951otter/?action=view&current=10A.jpg
http://s67.photobucket.com/albums/h298/1951otter/?action=view&current=4472530-R1-003-0.jpg
http://s67.photobucket.com/albums/h298/1951otter/?action=view&current=0A-1.jpg
http://s67.photobucket.com/albums/h298/1951otter/?action=view&current=587685-R1-012-4A.jpg
http://s67.photobucket.com/albums/h298/1951otter/?action=view&current=2A-1.jpg
http://s67.photobucket.com/albums/h298/1951otter/?action=view&current=587685-R1-028-12A.jpg
http://s67.photobucket.com/albums/h298/1951otter/?action=view&current=004_4.jpg
http://s67.photobucket.com/albums/h298/1951otter/?action=view&current=18A1.jpg
http://s67.photobucket.com/albums/h298/1951otter/?action=view&current=17A1.jpg

See /read mad electric for some incite.
http://www.madelectrical.com/electrical-tech.shtml

If you do your own wiring harness I crimped, soldered and used heat shrink on all connectors. Then labeled each and clear heat shrink over the label. I have several binders on what I did, the excel spread sheet was set up showing what main input of the fuse panel goes to and how wired to switches and working part. It worked well as to what wire went where.

if you wish help just ask
look at the photo link

Last edited by carolines truck; 03/09/2010 4:32 AM.
Jim & Caroline
The highway is for gamblers, better use your good sense."
Gooday-that's my 1¢ answer due to the lousy economy ~ cause I ain't got - no . mo . doe
Every Shaver | Now Can Snore | Six More Minutes | Than Before ... | Half A Pound for Half a Dollar | Spread On Thin | Above the Collar || BURMA-SHAVE