| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,135 Posts1,056,423 Members48,441 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Dec 2003 Posts: 2,953 'Bolter | | 'Bolter Joined: Dec 2003 Posts: 2,953 | I have rewired my truck one wire at a time. Very easy to do as long as you have good wire, connectors and a crimping tool.
There is a schematic in the back of the shop manual which also specifies wire gauge. If you are going to 12v you can use a smaller gauge wire.
The only difficult part I had was accessing the instrument panel because of the tight working area. However that same problem exists even if you are using a new wiring harness.
If you need more either Email or send me a PM.
Bill | | |
|
|
| |
