| |
Click on image for the lowdown. 
====
| | |
7 members (LAJones48, Barry Martak, Otto Skorzeny, Waveski, Shaffer's1950, Rusty Heaps, 1 invisible),
110
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,094 Posts1,056,465 Members48,443 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#60901 05/31/2006 3:48 PM | Joined: Mar 2005 Posts: 627 'Bolter | | 'Bolter Joined: Mar 2005 Posts: 627 | Greg is correct as long as the pushrod is not way too long or way too short. In other words, 6" versus 5.95" versus 6.05" will not cause this but 6" versus 4" versus 8" definately would.
Although it may be totally insignificant, 6" versus 5.95" will defeinately have SOME affect on wear at the push rod top end and with the rocker end that it contacts.
Having no personal experience myself I am probing to see what others have done and what results they obtained before I blindly make uninformed assumptions and screw up something.
Mike Barnes
1950 GMC 1-ton pickup
| | | |
Entire Thread
| 
848 -> 261: rockers, springs, pushrods
| 50GMC253 | 05/25/2006 1:41 PM | |
Re: 848 -> 261: rockers, springs, pushrods
| NM51 | 05/25/2006 5:49 PM | |
Re: 848 -> 261: rockers, springs, pushrods
| 50GMC253 | 05/25/2006 8:58 PM | |
Re: 848 -> 261: rockers, springs, pushrods
| NM51 | 05/26/2006 3:51 PM | |
Re: 848 -> 261: rockers, springs, pushrods
| JiMerit Boltr#43 | 05/26/2006 3:57 PM | |
Re: 848 -> 261: rockers, springs, pushrods
| Greg_H | 05/26/2006 11:29 PM | |
Re: 848 -> 261: rockers, springs, pushrods
| 50GMC253 | 05/30/2006 1:14 PM | |
Re: 848 -> 261: rockers, springs, pushrods
| NM51 | 05/30/2006 10:02 PM | |
Re: 848 -> 261: rockers, springs, pushrods
| Greg_H | 05/31/2006 1:05 AM | |
Re: 848 -> 261: rockers, springs, pushrods
| 50GMC253 | 05/31/2006 3:48 PM | |
Re: 848 -> 261: rockers, springs, pushrods
| tclederman | 05/31/2006 4:26 PM | |
Re: 848 -> 261: rockers, springs, pushrods
| Greg_H | 06/01/2006 1:52 AM | |
|
|
| |
