Bill, having been both a factory rep and a distributor/dealer for both large street and small utility plows over the years I would recommend something from an older one ton/two ton truck. The reason being that they are Universal Mount, not custom mount as is the case with pickup plows. Universals are made in 9-10'sizes and will be about 30" + - in heigth. I'd look for a Meyers (yellow)or Western (red)brand because of the 12V-DC power units. Parts are still available for most of the older power units. I've sold both and both will do the job however Western is better built and the people are MUCH nicer. There are several newer brands on the market in the last 6-8 years but they are nearly all custom mounts. The ones I'm talking about are Medium Duty plows. Stay away from highway plows all together. They are simply too large and heavy for your old girl.
Fisher is a very nice product but all older Fishers use an engine driven pump with considerable installation issues that are not involved in mounting an electric pump.
If push comes to shove (no pun intended) and you can't find one of these send me a private e-mail and I'll tell you how to build a mounting kit provided you can find the plow, sector (semi-circle) and A frame. Plows in the size you need will always have power angle, i.e., cyliders on the A frame to change the plows position. Look around and I think you find something.
One note of caution: be sure your front end is in good condition with king pins, ball joints, tie rod ends, springs, etc are tight and working properly. Plows are very hard on chassis and if you have a minor problemn it will get magnified all out of proportion.
Last edited by 53moneypit; 08/01/2009 3:09 PM.
