| |
Labor Day Putting down your wrenches or time for
MORE wrenching? 
Plenty of places to share. | | Click on image for the lowdown. 
====
| | | Forums66 Topics128,009 Posts1,055,297 Members48,419 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: May 2006 Posts: 679 Shop Shark | | Shop Shark Joined: May 2006 Posts: 679 | 180 degrees is typical. Mine runs at the mid-point of the gage. Make sure it is facing the correct way. You can check it in a pan of water, with a cooking thermometer for verification. Put it on the stove and measure the temp when it opens. You might also consider your sending unit and/or gage ground. It is possible the thermostat is working properly, but your readout isn't accurate. I'd do a cal-check to isolate the issue. https://www.stovebolt.com/ubbthreads/ubbthreads.php?ubb=showflat&Number=513363Bill | | |
|
|
| |
