| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,037 Posts1,055,470 Members48,424 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Sep 2006 Posts: 3,596 'Bolter | | 'Bolter Joined: Sep 2006 Posts: 3,596 | Joe has it right the HF puller works like a champ for 10$ If you tighten it and it doesen't pop tap it on the side away from the machined surface. Also tighten it and walk away for a few minutes and then tighten it a little bit more works most of the time. For anything rusted PB Blaster or similar spray and let it sit overnight then come back to it. You didn't say where the pedals are stuck? Is it the large assembly off the frame or the fine thread bolts that hold them together right behind the firewall? | | |
|
|
| |
