| |
Click on image for the lowdown. 
====
| | |
2 members (TUTS 59, tclederman),
68
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,154 Posts1,056,856 Members48,456 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#53478 12/15/2005 5:36 PM | Joined: Mar 2005 Posts: 1,513 'Bolter | | 'Bolter Joined: Mar 2005 Posts: 1,513 | If the hole isn't washed out too big a helicoil will give a permanent and virtually invisible repair. For example if the stud is 3/8" fine thread the drill size would be 25/64" or .390" If the hole is larger than the drill size another method should be used. Here's a tap drill chart for helicoils. http://www.carbidedepot.com/formulas-tap-helicoil.htm Curt B.
1952 1300 Canadian 1/2 ton restomod You Tube | | |
|
|
| |
