The Stovebolt Site Forums The Shop Area Engine Shop Welding a cast Iron Block??

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

6 members (32Fordpuchoptop, Youngin' Tut 59, treegrower, Gray_Ghost, Wickedbass, WICruiser), 66 guests, and 3 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,076

Posts1,055,922

Members48,430

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: Welding a cast Iron Block?? #52973 12/01/2005 12:28 AM
Joined: Sep 2003 Posts: 2,384 Arkansaw 6 64fleetside Shop Shark
64fleetside Shop Shark 6 Joined: Sep 2003 Posts: 2,384 Arkansaw	JB weld was also used successfully @ the machine shop I worked at, if the break was in an unpressurized area it was used almost exclusively. Grind a Vee, rough area w/80 grit & JB away. Brian My \'64\'s in the Gallery Pictures in my Photobucket 1964 C10 Custom Cab 350/700R4 1964 Suburban 350/700R4 1979 Ford F350 4x4 400/c6

Entire Thread
Subject	Posted By	Posted
Welding a cast Iron Block??	Old Coes	11/27/2005 9:23 PM
Re: Welding a cast Iron Block??	64fleetside	11/27/2005 10:02 PM
Re: Welding a cast Iron Block??	atomarc	11/27/2005 11:28 PM
Re: Welding a cast Iron Block??	Old Coes	11/28/2005 12:30 AM
Re: Welding a cast Iron Block??	Hot Rod Dad	11/28/2005 1:16 AM
Re: Welding a cast Iron Block??	dunfire	11/28/2005 12:35 PM
Re: Welding a cast Iron Block??	truckernix	11/28/2005 12:55 PM
Re: Welding a cast Iron Block??	51bolt	11/28/2005 1:13 PM
Re: Welding a cast Iron Block??	Hot Rod Dad	11/28/2005 4:48 PM
Re: Welding a cast Iron Block??	Curt B.	11/28/2005 5:38 PM
Re: Welding a cast Iron Block??	Joe H	11/28/2005 5:41 PM
Re: Welding a cast Iron Block??	atomarc	11/28/2005 6:03 PM
Re: Welding a cast Iron Block??	Hot Rod Dad	11/28/2005 7:09 PM
Re: Welding a cast Iron Block??	64fleetside	12/01/2005 12:28 AM
Re: Welding a cast Iron Block??	apart hillbilly	12/01/2005 1:07 AM
Re: Welding a cast Iron Block??	oldcarandtrucknut	12/02/2005 1:34 AM
Re: Welding a cast Iron Block??	ALBERT	12/02/2005 1:43 AM
Re: Welding a cast Iron Block??	arnswine...	12/02/2005 6:19 AM
Re: Welding a cast Iron Block??	ove	12/02/2005 10:54 PM

Moderated by Phak1, Woogeroo

Hop To

Link Copied to Clipboard