The Stovebolt Site Forums The Shop Area Engine Shop change flywheel from 6v to 12v - pull engine or lower tranny?

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

1 members (Steve_H), 125 guests, and 2 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,162

Posts1,056,935

Members48,458

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: change flywheel from 6v to 12v - pull engine or lower tranny? #52216 11/11/2005 3:28 AM
Joined: Dec 2002 Posts: 571 Tarpon Springs, FL S Shipwright Shop Shark
Shipwright Shop Shark S Joined: Dec 2002 Posts: 571 Tarpon Springs, FL	That is correct! Prolly easier to change the starter. A lot easier! Good luck My Truck Photos My Truck Video

Entire Thread
Subject	Posted By	Posted
change flywheel from 6v to 12v - pull engine or lower tranny?	Jorge	11/11/2005 2:20 AM
Re: change flywheel from 6v to 12v - pull engine or lower tranny?	SWEET	11/11/2005 2:26 AM
Re: change flywheel from 6v to 12v - pull engine or lower tranny?	yabica	11/11/2005 2:29 AM
Re: change flywheel from 6v to 12v - pull engine or lower tranny?	53moneypit	11/11/2005 2:34 AM
Re: change flywheel from 6v to 12v - pull engine or lower tranny?	Jorge	11/11/2005 2:40 AM
Re: change flywheel from 6v to 12v - pull engine or lower tranny?	yabica	11/11/2005 2:40 AM
Re: change flywheel from 6v to 12v - pull engine or lower tranny?	Jorge	11/11/2005 2:43 AM
Re: change flywheel from 6v to 12v - pull engine or lower tranny?	Jorge	11/11/2005 2:45 AM
Re: change flywheel from 6v to 12v - pull engine or lower tranny?	Jorge	11/11/2005 2:51 AM
Re: change flywheel from 6v to 12v - pull engine or lower tranny?	Greg_H	11/11/2005 3:09 AM
Re: change flywheel from 6v to 12v - pull engine or lower tranny?	Jorge	11/11/2005 3:20 AM
Re: change flywheel from 6v to 12v - pull engine or lower tranny?	Jorge	11/11/2005 3:26 AM
Re: change flywheel from 6v to 12v - pull engine or lower tranny?	Shipwright	11/11/2005 3:28 AM
Re: change flywheel from 6v to 12v - pull engine or lower tranny?	Jorge	11/11/2005 3:32 AM
Re: change flywheel from 6v to 12v - pull engine or lower tranny?	Shipwright	11/11/2005 3:33 AM
Re: change flywheel from 6v to 12v - pull engine or lower tranny?	Flxible	11/11/2005 3:34 AM
Re: change flywheel from 6v to 12v - pull engine or lower tranny?	Jorge	11/11/2005 3:40 AM
Re: change flywheel from 6v to 12v - pull engine or lower tranny?	Greg_H	11/11/2005 4:36 AM
Re: change flywheel from 6v to 12v - pull engine or lower tranny?	truckernix	11/11/2005 2:03 PM
Re: change flywheel from 6v to 12v - pull engine or lower tranny?	Wrenchbender Ret.	11/11/2005 5:36 PM
Re: change flywheel from 6v to 12v - pull engine or lower tranny?	scdascda	11/11/2005 6:43 PM
Re: change flywheel from 6v to 12v - pull engine or lower tranny?	NM51	11/16/2005 8:00 PM
Re: change flywheel from 6v to 12v - pull engine or lower tranny?	NM51	11/16/2005 8:33 PM
Re: change flywheel from 6v to 12v - pull engine or lower tranny?	Wrenchbender Ret.	11/16/2005 9:27 PM

Moderated by Phak1, Woogeroo

Hop To

Link Copied to Clipboard