The Stovebolt Site Forums The Shop Area Engine Shop 700r and 3.08 rear end

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

3 members (Wayne67vert, Peggy M, klhansen), 53 guests, and 2 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,154

Posts1,056,851

Members48,456

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: 700r and 3.08 rear end Whitedog #496119 01/22/2009 2:54 AM
Joined: Jan 2009 Posts: 47 St. Paul. MN. H hayhauler71 Wrench Fetcher
hayhauler71 Wrench Fetcher H Joined: Jan 2009 Posts: 47 St. Paul. MN.	I would use 3.73 gears with that 700r trans, rpm at 65 mph. should be right around 1800 to 2000 rpm depending on tire height.GOOD LUCK.

Entire Thread
Subject	Posted By	Posted
700r and 3.08 rear end	bigdog58	01/21/2009 8:15 PM
Re: 700r and 3.08 rear end	don stocker	01/21/2009 8:28 PM
Re: 700r and 3.08 rear end	bigdog58	01/21/2009 8:44 PM
Re: 700r and 3.08 rear end	Wrenchbender Ret.	01/21/2009 9:51 PM
Re: 700r and 3.08 rear end	bigdog58	01/21/2009 11:11 PM
Re: 700r and 3.08 rear end	bigdog58	01/21/2009 11:13 PM
Re: 700r and 3.08 rear end	Wrenchbender Ret.	01/22/2009 12:24 AM
Re: 700r and 3.08 rear end	Whitedog	01/22/2009 2:32 AM
Re: 700r and 3.08 rear end	hayhauler71	01/22/2009 2:54 AM
Re: 700r and 3.08 rear end	OldSub	01/22/2009 4:31 AM
Re: 700r and 3.08 rear end	Rcimp	01/22/2009 2:52 PM
Re: 700r and 3.08 rear end	don stocker	01/22/2009 3:22 PM
Re: 700r and 3.08 rear end	dan-pa	01/22/2009 5:15 PM
Re: 700r and 3.08 rear end	don stocker	01/22/2009 6:28 PM

Moderated by Phak1, Woogeroo

Hop To

Link Copied to Clipboard