The Stovebolt Site Forums The Shop Area Engine Shop 700r and 3.08 rear end

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

6 members (CATMAN, tclederman, BarryP, DadsFirstPickup, Bill Hanlon, Millenimech), 95 guests, and 4 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,154

Posts1,056,842

Members48,456

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: 700r and 3.08 rear end Wrenchbender Ret. #496101 01/22/2009 2:32 AM
Joined: Mar 2008 Posts: 1,775 IL W Whitedog 'Bolter
Whitedog 'Bolter W Joined: Mar 2008 Posts: 1,775 IL	3.08 is too much gear for the 700r4. You would be better off with a TH350 or 400. A shift kit and an overdrive module might help, but I doubt it. Better off with a 3.73 or 3.42 gear if you plan on using the 700R4. 1954 3600 Chevy Truck "The Fake Truck" In the Stovebolt Gallery More pix on Photobucket

Entire Thread
Subject	Posted By	Posted
700r and 3.08 rear end	bigdog58	01/21/2009 8:15 PM
Re: 700r and 3.08 rear end	don stocker	01/21/2009 8:28 PM
Re: 700r and 3.08 rear end	bigdog58	01/21/2009 8:44 PM
Re: 700r and 3.08 rear end	Wrenchbender Ret.	01/21/2009 9:51 PM
Re: 700r and 3.08 rear end	bigdog58	01/21/2009 11:11 PM
Re: 700r and 3.08 rear end	bigdog58	01/21/2009 11:13 PM
Re: 700r and 3.08 rear end	Wrenchbender Ret.	01/22/2009 12:24 AM
Re: 700r and 3.08 rear end	Whitedog	01/22/2009 2:32 AM
Re: 700r and 3.08 rear end	hayhauler71	01/22/2009 2:54 AM
Re: 700r and 3.08 rear end	OldSub	01/22/2009 4:31 AM
Re: 700r and 3.08 rear end	Rcimp	01/22/2009 2:52 PM
Re: 700r and 3.08 rear end	don stocker	01/22/2009 3:22 PM
Re: 700r and 3.08 rear end	dan-pa	01/22/2009 5:15 PM
Re: 700r and 3.08 rear end	don stocker	01/22/2009 6:28 PM

Moderated by Phak1, Woogeroo

Hop To

Link Copied to Clipboard