| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,030 Posts1,055,430 Members48,422 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Aug 2006 Posts: 112 Wrench Fetcher | | Wrench Fetcher Joined: Aug 2006 Posts: 112 | Use DCEN (Direct current electrode negative) for flux core....this means that the wire is negative. You will have to reverse the two welding cable connections under the wire feeder conver. DCEP is for solid wire (probably have to look it up on the miller site. Make sure you have FLOW out the nozzle. If you have junk in the gas line it might whoosh, then flow at a really low flow rate and burn welds. Some flux core wire is shielded with gas AND flux.
Hope this helps
64 & 66 GMC long fleetside 4x4
Cartwright, OK
| | |
|
|
| |
