| |
Click on image for the lowdown. 
====
| | |
8 members (delky, val, UtahYork, Otto Skorzeny, mason86, Bill Hanlon, Woodcmiami, 1 invisible),
60
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,030 Posts1,055,424 Members48,422 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Feb 2007 Posts: 434 Shop Shark | | Shop Shark Joined: Feb 2007 Posts: 434 | Can you hear the gas shussing out of the nozzle when you pull the trigger on the MIG gun? Sounds like it isn't getting any gas on the weld at all.
Other thing, when you are welding with gas, it is different polarity than with flux core. Lots of welders come from the factory wired for flux core, not gas (because they ship them with a roll of flux core so the buyer can run them if they haven't bought a tank of gas yet). So double check the owner's manual on the polarity for gas. You should have had to flip the cover up and loosen bolts and move two wires to two different lugs.
R-Bo
1959 Apache 1/2 ton Big Window, Short bed Fleetside (under reconstruction)
1966 GMC 305V6 in the family
| | |
|
|
| |
