Parting it out on Ebay and local sources, funds will be used to finish my 1950. It is interesting the way these guys prepped the old navy trucks. The put 1/4" plywood down on the floors Drywall screws) and covered with tarpaper (you could throw a cat through them). They plug welded all mirror holes, wipers etc or just bondo if the hole is small enough. Nice thing is they left most small items, wiring, gauges, heaters etc in place. Everything major on the frames was just torched off where they could, one coat of blue paint inside and out and it was good to go. This one had some nice options Recirc heater, cigarette lighter, most switches, dome light, lots of stuf like the wiper switch, transmission arms was just tucked under the dash.
