| |
Click on image for the lowdown. 
====
| | |
7 members (Charles in CA, 32Fordpuchoptop, tclederman, 68ironhead, JW51, Shade Baby, 3B),
102
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,050 Posts1,055,648 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#46986 06/28/2005 3:09 AM | Joined: Apr 2005 Posts: 40 Wrench Fetcher | | Wrench Fetcher Joined: Apr 2005 Posts: 40 | When I bought my 58 Panel it already had a '67 Camero 327 in it. I was having problems with the accelorator pump in the carb so I got a rebuild kit and then with a new kit in the carb it wouldn't idle. So I bought a new 2g 2 barrel carb and it's better but I can still see gas dripping into the venturi's at idle. What am I missing here? The idle is around 700 rpm and the acceleration is good for this combo but the extra gas dripping in the carb is causing small backfires thru the headers when I lift the pedal. Should it be time I bought a rochester book and start looking at the pictures? Thanks.
Mike
In loving Honor of PFC Benjamin Gandalf Young 30 March 1988 - 27 May 2007 Sometime I wonder, Who you'd be today www.BENS58.COM | | |
|
|
| |
