| |
Click on image for the lowdown. 
====
| | |
7 members (msmall, Otto Skorzeny, Phak1, 55shaker, TUTS 59, Wayne67vert, 1 invisible),
106
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,095 Posts1,056,069 Members48,433 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#46562 06/22/2005 6:34 PM | Joined: Mar 2002 Posts: 9,115 'Bolter | | 'Bolter Joined: Mar 2002 Posts: 9,115 | The shim or shims on top of the steering knuckle are used to adjust the vertical play. It should not exceed .005" . Generally you can feel play at about .005" between two parts but less than this you can't. If the play or clearance is too large, the bottom bearing will be damaged by the pounding that will occur. The bearing races are very hard and brittle. | | |
|
|
| |
