The Stovebolt Site Forums The Shop Area Paint and Body Shop Bleed through

Labor Day

Labor Day

Putting down your wrenches or time for
MORE wrenching?
Wrenching this Labor Day

Plenty of places to share.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

3 members (jay d, 2 invisible), 54 guests, and 3 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,009

Posts1,055,292

Members48,419

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: Bleed through tclederman #440795 08/12/2008 1:26 AM
Joined: Mar 2008 Posts: 31 East Coast G GMC Trucks New Guy
GMC Trucks New Guy G Joined: Mar 2008 Posts: 31 East Coast	I did sand it before I put the Epoxy Primer on. Then, I could see the outer line of the filler puddy. Sould I sand it and spray more Epoxy Primer on or should I use something else?

Entire Thread
Subject	Posted By	Posted
Bleed through	GMC Trucks	08/10/2008 11:51 PM
Re: Bleed through	Chev4t6	08/11/2008 12:21 AM
Re: Bleed through	david dyehouse	08/11/2008 12:25 AM
Re: Bleed through	Flxible	08/11/2008 12:46 AM
Re: Bleed through	GMC Trucks	08/11/2008 12:56 AM
Re: Bleed through	Tiny	08/11/2008 2:05 PM
Re: Bleed through	SW_Radial	08/11/2008 2:24 PM
Re: Bleed through	GMC Trucks	08/11/2008 10:35 PM
Re: Bleed through	tclederman	08/12/2008 12:36 AM
Re: Bleed through	GMC Trucks	08/12/2008 1:26 AM
Re: Bleed through	Flxible	08/12/2008 12:05 AM
Re: Bleed through	GMC Trucks	08/12/2008 12:24 AM
Re: Bleed through	Pakrat48	08/13/2008 12:03 AM
Re: Bleed through	Joe H	08/13/2008 12:44 AM
Re: Bleed through	GMC Trucks	08/13/2008 1:16 AM
Re: Bleed through	tclederman	08/13/2008 4:58 AM
Re: Bleed through	olcarguy	08/13/2008 7:48 PM
Re: Bleed through	GMC Trucks	08/14/2008 1:54 AM
Re: Bleed through	Tiny	08/14/2008 3:23 PM
Re: Bleed through	GMC Trucks	08/15/2008 12:53 AM
Re: Bleed through	Scott Danforth	08/15/2008 1:03 AM
Re: Bleed through	GMC Trucks	08/18/2008 1:14 AM
Re: Bleed through	4ontheFloor	08/18/2008 7:27 AM

Moderated by klhansen

Hop To

Link Copied to Clipboard