The Stovebolt Site Forums The Shop Area The HiPo Shop Rockers and valve covers

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

4 members (Bill Marlow, TUTS 59, Wally / Montana, Shade Baby), 87 guests, and 4 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,132

Posts1,056,385

Members48,441

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: Rockers and valve covers Bluepen #401885 04/14/2008 2:33 AM
Joined: Apr 2006 Posts: 159 West of the White river 6 61 suburban Shop Shark
61 suburban Shop Shark 6 Joined: Apr 2006 Posts: 159 West of the White river	Do you have aftermarket heads or stock castings? I have seen issues with the aftermarket heads locating the stud closer to the pushrod holes causeing the issues you are seeing.Can you grind enough material from the rocker to clear ? In the works 2006 GEN III 6.0 /4L80E/ 205 New process,A/C and power brakes .

Entire Thread
Subject	Posted By	Posted
Rockers and valve covers	Bluepen	04/13/2008 9:08 PM
Re: Rockers and valve covers	61 suburban	04/14/2008 2:33 AM
Re: Rockers and valve covers	SW_Radial	04/14/2008 5:35 AM
Re: Rockers and valve covers	Bluepen	04/14/2008 12:18 PM
Re: Rockers and valve covers	SW_Radial	04/14/2008 12:27 PM
Re: Rockers and valve covers	dale937	04/14/2008 6:58 PM
Re: Rockers and valve covers	gofstbuick	04/15/2008 5:09 AM
Re: Rockers and valve covers	Slickriffs	04/15/2008 3:13 PM
Re: Rockers and valve covers	Joe H	04/15/2008 3:24 PM
Re: Rockers and valve covers	32fire2	04/15/2008 3:39 PM
Re: Rockers and valve covers	Wrenchbender Ret.	04/17/2008 9:48 PM
Re: Rockers and valve covers	bill1949	04/22/2008 12:14 PM
Re: Rockers and valve covers	Bluepen	04/23/2008 3:48 PM

Moderated by Fibonachu, KCMongo

Hop To

Link Copied to Clipboard