BIG CHEVY ,
Here is one tip , I ended up alighning the factory holes in the inner fender to the fender and used 2 of the smallest vice grips in my box on each side to hold them in place (there is room if ya put the vice grips on from inside the fender well & just catch the 2 pcs of sheetmetal) , I then loosened up some of the bolts holding the bars of the grill to let it flex a bit easier(ones I knew I COULD GET TO AFTER THE GRILL WAS IN),actually after that it went pretty smooth had to use a small philips screw driver in each side to help hold the grill and move it to alighn and start the first bolt on each side ,after that I was able to start all the bolts an then tightened everything up.
WHALLA ! DONE !
Tim
