| |
Click on image for the lowdown. 
====
| | |
5 members (Niels V, Phak1, MNSmith, 2 invisible),
77
guests, and
4
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,180 Posts1,057,141 Members48,463 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Oct 2003 Posts: 5,152 Cruising in the Passing Lane | | Cruising in the Passing Lane Joined: Oct 2003 Posts: 5,152 | Whoever told you the S-10 is the right width doesn't have the whole story and may have mislead you.
Do you want the five lug pattern or the six? Since the S-10 is five I'll guess that is the direction you want to do. I used the rear from a '73 Chevelle under mine. Its 62 inches wide across the wheel mounting face, which I think is the better place to measure. Measuring backing plates tells you if it will fit your springs, measuring the wheel mounting faces tells you where the wheels will end up under the fenders.
The 62 inch wide axle I used seems to work about perfect. The downside of the Chevelle is you have to cut the coil spring stuff off and weld on leaf spring pads. I've been driving mine five years with that Chevelle rear under it.
1955 1st GMC Suburban | 1954 GMC 250 trailer puller project | 1954 GMC 250 Hydra-Matic | 1954 Chevy 3100 . 1947 Chevy COE | and more...
It's true. I really don't do anything but browse the Internet looking for trouble... | | |
|
|
| |
