| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,102 Posts1,056,184 Members48,436 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Sep 2003 Posts: 2,384 Shop Shark | | Shop Shark Joined: Sep 2003 Posts: 2,384 | If you can get a piece of bare copper(i use water pipe smashed flat)clamped tight behind the holes, you can make the repair w/a MIG, you can almost make metal. You want to "stitch" around the outside of the holes & let the metal cool between zaps. | | | |
Entire Thread
|  
Repairing small, thin-edged holes
| jmmmn37 | 11/07/2007 10:26 PM | |
Re: Repairing small, thin-edged holes
| 64fleetside | 11/07/2007 11:05 PM | |
Re: Repairing small, thin-edged holes
| 4ontheFloor | 11/08/2007 8:28 AM | |
Re: Repairing small, thin-edged holes
| Czechman | 11/08/2007 1:17 PM | |
Re: Repairing small, thin-edged holes
| vickraft | 11/09/2007 12:04 AM | |
Re: Repairing small, thin-edged holes
| BIG CHEVY 3600 | 11/09/2007 4:35 AM | |
Re: Repairing small, thin-edged holes
| jmmmn37 | 11/09/2007 6:24 PM | |
Re: Repairing small, thin-edged holes
| vickraft | 11/10/2007 9:34 PM | |
Re: Repairing small, thin-edged holes
| BIG CHEVY 3600 | 11/12/2007 4:22 AM | |
Re: Repairing small, thin-edged holes
| jmmmn37 | 11/15/2007 2:32 PM | |
|
|
| |
