| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,057 Posts1,055,812 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jun 2004 Posts: 8,597 Riding in the Passing Lane | | Riding in the Passing Lane Joined: Jun 2004 Posts: 8,597 | If the sector shaft goes back & forth without turning when you move the worm shaft It will need rebuilding. If there is looseness in the input shaft you can loosen the lock ring & tighten down the adjustment nut just enough to remove the looseness. You can tighten down the adjust screw on top but very little. Go about 1/4 turn & try it out. If it binds or doesn,t feel right back it off. If the play is excessive you will need a reman. box.
They say money can't buy happiness. It can buy old Chevy trucks though. Same thing. 1972 Chevy c10 Cheyenne SuperIn the Gallery Forum | | |
|
|
| |
