ask the motorcyclist on this list. grin grin

Quote
The easiest way to lube a cable is
use a motorcycle cable lubricator. A dedicated lubricator is the best solution to apply to control cables. :p
I used white litium spray grease on ALL my motorcycle cables !!!
you can buy one of these little puppies at any good M/C shop.
it clamps on and allows you to insert a nozzle tip DIRECTLY INTO and lubes the entire entire inner cable.

http://www.jpcycles.com/productgrou...h=cable%20oiler&store=All&page=1

http://www.motorcyclecruiser.com/tech/lubing_control_cables/photo_01.html

if you wanted to lube a non jacketed cable, slip some heat-shrink over it and it should then keep the lube inside

Jim & Caroline
The highway is for gamblers, better use your good sense."
Gooday-that's my 1¢ answer due to the lousy economy ~ cause I ain't got - no . mo . doe
Every Shaver | Now Can Snore | Six More Minutes | Than Before ... | Half A Pound for Half a Dollar | Spread On Thin | Above the Collar || BURMA-SHAVE