Hi Guys , I'm back to the fountain af knowledge for another drink. My question is are there any different driveshaft yokes that will fit with my new t-5 from an s-10 pickup. I got the trans bolted up to the back of the 235 in my 1961 p/u. I went to the junk yard the other day to find a driveshaft yoke off an s-10 and couldn't find anything with a t-5 that had not allready been stripped. so are there any other transmissions that have the same output shaft as mine so I can pull the yoke from another type of car.And this this brings up Question nomber two. Are all these yokes the same on the driveshaft side? In other words will I be able to just knock my old yoke off and install the new one in its place